High-Quality Submersible Pumps from China Suppliers | Reliable Factory for Clean Water Applications
Applications
- Suitable for use with clean water that does not contain abrasive particles.
- The high efficiency and continuous duty capabilities makes these pumps ideal for use in activities such as flood and spray irrigation, gardening, agriculture, drawing water from lakes, rivers and wells, or for any number of different industrial applications where the characteristics of high head and mid flow rates are required.
Motor
- Two-pole induction motor (n=2850 r.p.m)
- Insulation Class B
- Protection IP68
- Continuous service S1
- Thermal protector for single phase
- Single-phase 220V/50Hz, 60Hz if request
- Three-phase 380V/50Hz, 60Hz if request
Operating Conditions
- 8m maximum immersion depth
- Liquid temperature up to 35°C
- Maximum ambient temperature 40°C
Component Construction
- Pump body: Cast iron
- Suction filter: AISI304 SS
- Impeller: Cast iron
- Motor shaft: AISI304SS
- Mechanical seal: Ceramic-Graphite + Ceramic-Graphite
- Cable: 12m power cable with plug
Frequently Asked Questions
What types of water is this pump suitable for?
The pump is suitable for use with clean water that does not contain abrasive particles.
What are the primary applications of this pump?
It is ideal for activities requiring high head and mid flow rates, such as flood and spray irrigation, gardening, agriculture, drawing water from lakes, rivers, and wells, as well as various industrial applications.
What is the maximum immersion depth and operating temperature?
The pump supports a maximum immersion depth of 8 meters, with a maximum liquid temperature of up to 35°C and a maximum ambient temperature of 40°C.
What materials are used in the construction of the pump?
The pump features a cast iron pump body and impeller, an AISI304 SS suction filter and motor shaft, a Ceramic-Graphite + Ceramic-Graphite mechanical seal, and comes with a 12m power cable with a plug.
What are the electrical specifications of the motor?
The motor is a two-pole induction motor (n=2850 r.p.m) with Insulation Class B, IP68 protection, and is rated for S1 continuous service. It is available in single-phase 220V/50Hz (60Hz on request) and three-phase 380V/50Hz (60Hz on request).