Hot Products
High-Quality Clean Self Priming Water Pump VWZB from China Suppliers and Factory for Non-Abrasive Liquids
Applications
- Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
- They are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments. The pump comes complete with a flap-check valve.
- Keep the water pressure stable to let water heater normally working.
- The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Motor
TypeTwo-pole induction motor (n=2850 r.p.m)
Insulation ClassClass B
ProtectionIP44
ServiceContinuous S1
Protection FeaturesThermal protector
Voltage/FrequencySingle-phase 220V/50Hz, 60Hz if request
Operating Conditions
Liquid TemperatureUp to 80°C
Ambient TemperatureUp to 40°C
Total Suction LiftUp to 9m
Component Construction
Pump bodyCast iron+AISI304 SS insert
Pump supportPure brass
Motor housingAluminum
ImpellerBrass
Motor shaftAISI304 SS
Mechanical sealCeramic/ Graphite
Frequently Asked Questions
What kinds of liquids are suitable for this pump?
This pump is suitable for clean water free of abrasive particles and liquids that are not chemically aggressive towards the pump materials.
What are the primary applications of this pump?
It is ideal for domestic use, distributing water with small pressure sets, garden and allotment irrigation, and keeping water pressure stable for water heaters.
What are the key specifications of the motor?
The motor is a two-pole induction motor (n=2850 r.p.m) with Insulation Class B, IP44 protection, continuous service S1, thermal protection, and runs on single-phase 220V/50Hz (or 60Hz if requested).
What are the maximum operating temperatures and suction lift?
The pump handles liquid temperatures up to 80°C and ambient temperatures up to 40°C, with a total suction lift capability of up to 9m.
What materials are used in the component construction?
It features a cast iron and AISI304 SS insert pump body, pure brass support, aluminum motor housing, brass impeller, AISI304 SS motor shaft, and a ceramic/graphite mechanical seal.
Does the pump require a specific installation environment?
Yes, the pump should be installed in an enclosed environment or at least sheltered from inclement weather.