Hot Products
High Efficiency Clean Water Centrifuge Pump HF - China Suppliers & Factory for Agriculture and Industrial Use
Applications
- Suitable for use in civil and agricultural applications.
- The high efficiency and continuous duty capabilities makes these pumps ideal for use in activities such as flood and spray irrigation, gardening, agriculture, drawing water from lakes, rivers and wells, or for any number of different industrial applications where the characteristics of high flow rates and mid to low head are required.
- The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Motor
- Two-pole induction motor (n=2850 r.p.m)
- Insulation Class B
- Protection IP44
- Continuous service S1
- Thermal protector for single phase
- Single-phase 220V/50Hz, 60Hz if request
- Three-phase 380V/50Hz, 60Hz if request
Operating Conditions
- Liquid temperature up to 60°C
- Ambient temperature up to 40°C
- Total suction lift up to 8m
Component Construction
- Pump body: Cast iron
- Pump support: Cast iron
- Motor housing: Aluminum
- Impeller: Brass
- Motor shaft: Carbon steel, AISI304 SS if request
- Mechanical seal: SIC/Graphite
Frequently Asked Questions
What are the primary applications of these pumps?
These pumps are suitable for civil and agricultural applications. They are ideal for flood and spray irrigation, gardening, agriculture, drawing water from lakes, rivers, and wells, as well as various industrial applications requiring high flow rates and mid to low head.
What are the motor specifications?
The pump features a two-pole induction motor (n=2850 r.p.m) with Insulation Class B, Protection IP44, and is rated for continuous service S1. It also includes a thermal protector for single-phase models.
What are the limit operating temperatures for this pump?
The pump can handle liquid temperatures up to 60°C and operate in ambient temperatures up to 40°C.
What is the maximum suction lift of the pump?
The pump supports a total suction lift of up to 8 meters.
What materials are used in the construction of the pump?
The pump body and support are made of cast iron, the motor housing is aluminum, the impeller is brass, the mechanical seal is SIC/Graphite, and the motor shaft is carbon steel (AISI304 SS available upon request).
Where should the pump be installed?
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather to ensure its longevity and proper operation.