China Clean Self Priming Water Pump VWZB - Quality Suppliers from Factory for Non-Abrasive Applications
Applications
- Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
- They are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments. The pump comes complete with a flap-check valve.
- Keep the water pressure stable to let water heater normally working.
- The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Motor
- Two-pole induction motor (n=2850 r.p.m)
- Insulation Class B
- Protection IP44
- Continuous service S1
- Thermal protector
- Single-phase 220V/50Hz, 60Hz if request
Operating conditions
- Liquid temperature up to 80°C
- Ambient temperature up to 40°C
- Total suction lift up to 9m
Component Construction
- Pump body: Cast iron + AISI304 SS insert
- Pump support: Pure brass
- Motor housing: Aluminum
- Impeller: Brass
- Motor shaft: AISI304 SS
- Mechanical seal: Ceramic / Graphite
What type of liquids can this pump handle?
This pump is designed for clean water that does not contain abrasive particles, as well as liquids that are chemically non-aggressive to the pump's construction materials.
What are the primary applications of this pump?
It is ideal for domestic water distribution, garden and allotment irrigation, working with small pressure sets, and stabilizing water pressure for water heaters.
What are the motor specifications and protection classes?
The pump features a two-pole induction motor (2850 r.p.m) with Class B insulation, IP44 protection, continuous S1 service, a thermal protector, and operates on single-phase 220V/50Hz (60Hz available on request).
What are the maximum temperature limits and suction lift?
The pump can handle liquid temperatures up to 80°C and operate in ambient temperatures up to 40°C, with a total suction lift capacity of up to 9 meters.
What materials are used in the construction of this pump?
It is constructed with a cast iron and AISI304 stainless steel insert pump body, pure brass support, aluminum motor housing, brass impeller, AISI304 stainless steel motor shaft, and a ceramic/graphite mechanical seal.
Where should this water pump be installed?
To ensure longevity and safety, the pump must be installed in an enclosed environment or at least sheltered securely from harsh and inclement weather conditions.